|
| Low loss combiner where 2 or more FM broadcast transmitters will be fed to a common antenna. | | | |
Each transmitter channel comprises of 3 high performance 164mm² (6" diameter equivalent) quarter wavelength cavity resonators.
The inital unit can be supplied with a 4 way coax harness that will enable the connection of 2 additional channels at a later stage, if required.
Each transmitter channel is capable of handling power of up to 100 Watts. *
The combiner is configured to be 19" rack mountable.
However, alternative mounting requirements may also be catered for. | | | |
* Note: maximum power into a N-type female connector at the combiner output is 400 Watts.
Optional 7/16 DIN female input & output connectors with higher power handling may be supplied. | | |
|
 |
| FREQUENCY BAND |
88 - 108 MHz |
| IMPEDANCE |
50 Ohms |
| VSWR |
<= 1.2:1 ( 300 KHz BW ) |
| INSERTION LOSS |
<= 0.6 dB (300 KHz BW) |
| ISOLATION |
>= 45dB (@ ± 1.6 MHz) |
| ISOLATION |
>= 80dB (@ ± 3.2 MHz) |
| TEMP. RANGE |
-30°C to +60°C |
| CONFIGURATION |
BANDPASS |
| POWER |
100 Watts (continuous) |
| TERMINATION |
'N' FEMALE |
| WIDTH |
483 mm |
| DEPTH |
500 mm |
| HEIGHT |
1300 mm |
| WEIGHT |
28kg |
| MOUNTING (POSITION) |
19" RACK MNT BRACKET |
| FINISH |
GREY ENAMEL |
|
|
|
|
 |
| Model 2x3CI1FM-6 |
 |
| Model 2x3CI1FM-6 |
|
